How to Measure Flooring, Sheds and Cabinets for a Demolition Quote
Measurements make a demolition quote easier to discuss, but the right measurement depends on what is being removed. Flooring is usually described by area, cabinets by length, and some small structures by their size category. Photos and access details are still important even when you know the dimensions.
Here is how to organize measurements for the Garbage Kings demolition estimate builder . Measure only what you can safely reach. You do not need to pull materials apart or climb onto a structure to request a quote.
Flooring: measure each room in square feet
For a rectangular room, multiply length by width, using feet for both. A room that is 12 feet long and 15 feet wide has 180 square feet of floor area.
For an L-shaped room, split the floor into rectangles and add their areas. Keep a note of each section so you do not count an overlapping area twice. List separate rooms individually if they have different flooring materials.
Tell us whether the floor is carpet, tile, hardwood, laminate or vinyl plank. Mention visible layers or adhesive if you already know about them, but leave unknown conditions for review. Floor area alone cannot show how a material was installed.
See our flooring removal service for the types of work we review.
Sheds: start with the footprint and material
The footprint is the length multiplied by the width at ground level. An 8 foot by 10 foot shed has an 80 square foot footprint. That is different from the surface area of its walls and roof.
Identify whether the shed is wood, metal or resin. If you’re unsure how to describe it, send dimensions and photos so our crew can review the size and material.
Photograph all accessible sides, the doors, the base and the route to the loading area. Note contents, nearby fencing and any services connected to the structure. Do not disconnect utilities or disturb an unsafe shed just to prepare a quote.
Read about shed removal before adding the work to your estimate.
Decks: record the surface dimensions and features
For a rectangular deck surface, use length times width. Add separate sections as separate measurements. Tell us about stairs, railings, raised sections and the deck's material so they can be considered when the scope is verified.
A photograph from farther back can show the relationship between the deck, house, fences and access route. Do not assume a surface measurement includes every support, footing or attached feature. Ask the team to confirm exactly what is included in the removal.
Cabinets: use linear feet and describe each run
Linear feet measure length rather than area. A straight cabinet run that is 10 feet long is 10 linear feet. Convert inches to feet by dividing by 12; a 96 inch run is 8 feet.
Record upper cabinets, base cabinets, islands and tall units separately, with photos of each. This gives our crew the information needed to explain how the cabinet rate applies and avoid counting a section twice.
Show the countertop as a separate detail and tell us whether it’s staying. Include the material if you know it. Ask the crew to confirm what the cabinet quote includes, especially for stone.
Stone countertops: send area, photos and access details
For a simple rectangular top, multiply length by depth in feet. Record separate sections and identify islands, corners and backsplashes. Tell us whether the top is stone and show its thickness where visible.
Our crew reviews stone countertops separately. A measurement helps describe the work. The material, attachment and access all affect the quote.
Keep the estimate preliminary
Measurements cannot fully describe weight, attachment methods, hidden layers or access. Our crew verifies the scope and final price with you before work begins.
Start a demolition estimate or send photos and measurements for review . You can also call 727-516-9867 to discuss cabinet removal or deck and fence removal .













